July 19, 2004I was thinking of removing my emblems,I think I will just keep the front sides and get rid of the back,What is the best way?Love Peace and Chicken Greace
Forums : Tips & Tricks : Removing Emblems (171 Views)
July 19, 2004First of all, find out if there are mounting holes behind them first. Chevy's and GMCs do NOT have holes, but most Fords do.
If you don't have holes, then use a hair dryer/heat gun to warm up the glue. Then use a piece of fishing line or twine to 'saw' behind the emblems. To get the residual glue off, use elbow grease, and goo-gone or WD40.
July 19, 2004Hi Mikey... Like Greg said.
If it'll help, here's a thread I started on the 'My Toyota Truck' site.
July 19, 2004Be extra careful with the heat gun. They get very hot and can easily damage your paint.
Also don't work on one spot to long move around and give yourself plenty of time. It is a long slow process. But when done with care you will get the effect your looking for.
Best of luck,
July 19, 2004I had a heat gun but wasn't sure so I used a hairdryer. I used a plastic putty knife and the Goo Gone. Good luck and let's see the pics of the results. Later, Trent
July 19, 2004Plastic putty knife + QD spray = good; dental floss = bad.
For me anyway - I gave up on the dental floss pretty quickly.
July 20, 2004Thanks for all the info,I will let you know if I do it and posts pics,Its kinda up in the air rite now,but I wanted the rite info before I went for it and I knew that you guys would have the best tips,I don't know what I would do without everyone here Peace Mikey